Monk Customs
ā Made and produced in Europe
Monk Customs - Polarstar F2
Monk Customs - Polarstar F2
Couldn't load pickup availability
!Meant for Europe only! šŖšŗ
Bite Sized Fusion Engine
Winner of the "Best HPA Engine" in the 9th Airsoft Players Choice Awards, the dual solenoid design of the F2ā¢ provides the same functionality as the legendary Fusion Engineā¢ but in a more compact, efficient and flexible design. Dual solenoids allow for the nozzle and the poppet valve to be adjusted independently of each other for unparalleled control over both the loading time and air volume used.Ā Ā
**All kits come with a Filter Fitting installed, FCU, Switchboard, Wire Harness and any additional components needed to convert the specific airsoft rifle model for which the kit is configured. The HPA Tank, Air Rig (regulator and line) and Battery needed to operate the system are purchased separately.
Ā
Technical Specifications
| Ā Velocity: 480fps w/ .20g @ 145psi |
| The F2ā¢ allows for easy velocity adjustment just by changing input pressure and does not require different nozzles to reach its full velocity range. Using a standard M4 as an example, velocity can be adjusted from below 280fps and up to approximately 480fps with a .20g BB. Velocity can vary per model as longer barrels will increase the maximum velocity while shorter barrels will decrease it.Ā |
| ROF: 30rps |
| The maximum cyclic rate of the F2ā¢ is affected by several factors such as the operating pressure as well as quality of the magazine and BB's used. However, 30 rounds per second is achievable in most standard configurations. |
| Air Efficiency: 1000+ shots from 13/3000 @ 1.5JĀ w/ .28g |
| The standard F2ā¢ poppet valve is equivalent to the Red Low-Flow poppet of the Fusion Engineā¢. However, this valve responds faster and requires less air volume to operate so the F2ā¢ is able to achieve greater air efficiency than even a finely tuned Fusion Engineā¢. |
| (Test Configuration: Red Poppet / 6.05x375mm Barrel) |
